Used Scrap Metal Shears and Shear Balers: What to Look For
Published:

Scrap metal shears and shear balers do the heavy lifting in a metal recycling yard. They take long, bulky or awkward ferrous and non-ferrous scrap and cut it into furnace-ready sizes, or compress and cut it in one cycle so it is easier to store, load and sell. A good used machine can give years of service, if you know what to look for. This guide covers the main types, the checks worth making before you buy, and a few shears and shear balers currently in stock at Machines on the Market.
Inclined shears and shear balers: what is the difference?
An inclined shear uses an angled feed box so material slides down towards the blade under gravity. It suits long, heavy material such as beams, rails, pipe and plate.
A shear baler (sometimes called a baler shear) adds a compression box with closing lids and a pusher ram. Loose scrap is compressed into a dense log and then pushed forward to the shear head and cut to length. It suits light and mixed scrap that would otherwise be bulky to handle.
Both types come in static and mobile versions. A static machine is built to stay in one place on a prepared base. A mobile or tracked unit can be moved around a site or between sites, which can help contractors and yards with more than one location. Always check the listing to confirm which configuration you are buying.
Key checks before you buy a used shear
- Cutting force and box size. Match the rated cutting force, cutting width and box length to the material you actually process. An undersized machine will struggle with heavy sections; an oversized one costs more to buy, move and run.
- Blades and liners. Look at the condition of the blades, the head and the wear liners. Ask whether the blades can be turned or replaced and when the liners were last renewed.
- Hydraulics. Check rams, seals, hoses and the power pack for leaks, and ask about oil and filter changes. New ram seals or a recent hydraulic overhaul are a real plus.
- Power source. Diesel machines can work where there is no suitable mains supply. Electric machines may suit fixed sites with the right power available. Make sure the option fits your site.
- Engine and hours. Ask for the hour reading and the engine history. A replacement engine or recent injector work can change the value of an older machine.
- Cycle time. If you can, see the machine working. A sluggish cycle time can point to worn pumps or valves and will limit your throughput.
- Controls and safety. Check the control system, emergency stops, guarding and any remote control. Ask for manuals and service records.
- Dismantling, transport and installation. Large shears are heavy, and a static unit needs a suitable base. Find out who dismantles and loads the machine, how it will be transported, and what you need on site before it arrives.
Shears and shear balers currently in stock
These machines are on the Machines on the Market stocklist at the time of writing. Details are taken from the live listings.
The 2005 Lefort Mobile 500 is a mobile baler shear with a diesel engine. The listing says it has had all the work and maintenance needed to present it in nearly new condition, including main ram seals and a new pusher rod. It can be viewed in Greece and is listed at £220,000 (GBP).
The 2006 Lefort Conqueror 600 is a static baler shear in good working condition, with a new head lining, a good cycle time, a CAT engine with new injectors and remote control. Listed specifications include 600 ton cutting force, 120 ton hold-down force, 2 x 240 box closing force, 120 ton pusher ram force, an 800mm cutting width, a 6m box and a weight of 49 ton. It is listed at £150,000 (GBP).
The 2012 Bonfiglioli 1500 inclined shear is in good working order with 3,160 hours and a new engine fitted in 2023. It is diesel powered and the listing says it is good for beams, rails, pipe, re-rod, skeleton plate and heavy or oversize material, and will process most ferrous and non-ferrous metal. It is located in London and listed at £180,000 (GBP).
The Idromec T800 shear baler is described as a 2017 stationary machine with a diesel-powered hydraulic power pack and 800 tonnes of cutting force. It is located in Italy and listed at £330,000 (GBP). The price includes dismantling and loading onto vehicles, and transport can be arranged if required.
Arranging a viewing
Seeing a shear working is the best way to judge its condition. Bring a list of the materials you process, ask to watch several full cycles, and check the service history while you are there. If the machine is overseas, ask early about dismantling, loading and transport so you can plan the full cost of getting it to your yard.
You can browse more shears and ferrous balers on the site. For more information on any machine, or to arrange a viewing, contact Machines on the Market: call Richard Cross on +44 7787 411485 or email info@machinesonthemarket.com.
